Louet Spring Loom 90-36" 8 Shaft 1 in stock now

Spring 90 The Louet Spring loom is one of the most innovative cleverly designed floor looms on the market today. It uses the Parallel counter-march system for the harnesses and lams, which is easy to use and simple to tie-up. An exclusive feature to this loom is the patented moving breast beam controlled by springs. The breast beam is attached to the loom in such a way that it is free to move toward the harnesses when the shed is made and then back toward the weaver when the shed is closed again. The distance between the breast beam and the back beam actually changes during weaving. With this system a larger shed can be obtained with less tension increase in the warp and less effort from the weaver. The advantages of this system are especially evident as you near the end of the warp. Even when the end of the warp is very close to the harnesses, a good shed can be made, thus saving yards and yards of wasted warp over the life of your loom. The moving breast beam also brings on exactly the same warp tension each time the warp is advanced. The design of the loom includes a built-in raddle on top of the castle and a storage shelf for keeping everything you need within easy reach. The Spring comes standard with 4 harnesses and 6 treadles, but gives the possibility to expand, by sets of 4 harnesses, to a maximum of 12 harnesses. The heddles and tie-up cords are of the Swedish Texsolv system that make them quite strong and non-stretching. The spring has two weaving widths 90 cm (36in) and 110 cm (44in). (See below). It comes standard with four harnesses, six treadles, 600 Texsolv heddles (Spring 90) and 800 Texsolv heddles (Spring 110), stainless steel reed 40-10 (10 e.p.i.) 12 cm (5in) inside height, friction brake, 2 lease sticks and 16 warp sticks. The Spring is made of lacquered beech and comes ready-to-assemble with clear instructions and tools. Spring 110 The Spring 110 is identical to the Spring 90 in all things except it has a wider weaving width. Optional: matching bench sectional warp beam with sections of 2 and 4 cm second warp beam including extra back beam. The dimensions are: width: Spring 90 is 120 cm (48in) wide, Spring 110 is 140 cm (55in), height: 115 cm (45in), depth: 94 cm (34in) and 68 cm (27in) folded. The Spring looms are packaged in two boxes for economical shipping. Shipping weights are: Spring 90: 38 kg (84 lb), Spring 110: 45 kg (100 lb).